PX01-39 GE Purtrex Cartridge Filter - 1.0 Micron Nominal

Product Description

The PX01-39 is a GE Purtrex cartridge filter with a nominal retention rating of 01 micron. The PX01-39 is made using a continuous manufacturing process that assures consistency. The PX01-39 has a length of 39 in. with a 2 1/2 in. OD and a 1 in. ID. The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex’ true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters. Purtrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal. Additional Information Purtrex Depth cartridge filters are made from thermally-bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA compliant sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Typical Applications ---potable water ---chemical filtration ---food & beverage ---plating bath ---amine filtration ---oil & gas ---electronics The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex has a graded density that traps large particles on the surface and smaller particles in the body of the filter. The Purtrex cartridge filter is very versatile do to its polypropylene construction it has a wide range of chemical compatibilities, from drinking water to specialty chemicals. This product is proudly made in the USA. Specifications Brand GE Purtrex Model PX 01-39 Pore size in µ1.00 Dimensions / Weights Length in inch 39.00 Length in cm 99.06 [Track Page Views With Auctiva's FREE Counter] (https://pages.ebay.com/seller-center/listing/listing-advanced-sellers/third-party-listing-tools.html#auctiva)

Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity.
Purtrex’ true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth.
This translates to longer life and fewer change-outs than existing string-wound or resin-bonded filters.
Purtrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact.
The filter incinerates to trace ash for easy disposal.

Additional Information

Purtrex Depth cartridge filters are made from thermally-bonded fibers of polypropylene.
GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges,
and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations.
When required, specify only FDA compliant sealing materials and end adapters.
GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions.
Conditions will vary with each application and users should carefully verify chemical compatibility.

Typical Applications

potable water
chemical filtration
food & beverage
plating bath
amine filtration
oil & gas
electronics

The Purtrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE’s patented melt blown microfiber technology, Purtrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Purtrex has a graded density that traps large particles on the surface and smaller particles in the body of the filter. The Purtrex cartridge filter is very versatile do to its polypropylene construction it has a wide range of chemical compatibilities, from drinking water to specialty chemicals. This product is proudly made in the USA.

Specifications

Brand GE Purtrex

Model PX 01-39

Pore size in µ1.00

Dimensions / Weights

Length in inch 39.00

Length in cm 99.06

Track Page Views With
Auctiva's FREE Counter